DGU-manufacture,factory,supplier from China

1, look at the glass markLook at the glass corners to see whether there is a tempered 3C mark, playing 3C mark (the kind that can not be scraped off) is basically tempered glass. Tempered glass processing procedures are first cut into the required size of ordinary float glass, then grinding, cleaning, with ink to play the national mandatory certification ccc mark, into the tempering furnace firing products after the glass is not cut or in the processing. And the ink is generally not scraped off after passing the high temperature.

2023.8.9-2023.8.13 Warm Sound Glass was invited to Vietnam to participate in the exhibition as well as to visit the airport project and customer's factory in Vietnam.Vietnam airport project ordered a total of about 7298m² of glass, configured with 8T ultra-white colored glaze + 1.52PVB + 8T ultra-white tri-silver low-e + 20A + 6mm ultra-white semi-tempered + 1.52PVB + 6mm ultra-white high-transparency  frosted semi-tempered glass

     Tempered glass is a kind of ordinary flat glass formed after heat treatment. It forms a compressive stress layer on the surface of the glass, with increased mechanical strength and heat-resistant impact strength, and a special crumb state.

In life, flat curved tempered glass we can often use, together with good characteristics, loved by people, in daily use, flat curved tempered glass to pay attention to maintenance, not only to extend its service life, but also to reduce damage, then flat curved tempered glass how to maintain it? Next take a look at it together!To often clean the tempered glass, in the daily cleaning, wipe with a wet towel or newspaper can be, wet towel can wipe most of the stains, newspaper can wipe the water stains on the glass surface.

Laminated glass, also known as laminated glass and vacuum glass, is a composite glass product made of two or more pieces of glass with one or more layers of organic polymer interlayer sandwiched between them, and after special high-temperature pre-pressing (or vacuuming) and high-temperature and high-pressure process, the glass and interlayer are permanently bonded as one. Laminated glass commonly used interlayer PVB, SGP, EVA, PU, etc., colored interlayer laminated glass, SGX class printed interlayer laminated glass, XIR class LOW-E interlayer laminated glass, etc.

The 32nd China International Glass Industry Technology Exhibition 2023 will be held in Shanghai New International Expo Center from May 6th to May 9th, Wensheng Glass welcomes you!Booth No: N2-211

Causes of mold on glass & How to deal withGlass mold is an industrial problem in the glass industry. Every spring and summer, due to the high temperature and high humidity weather, the glass rainbow/stain enters a peak period.

Heat Strengthened Glass Product      Annealed float glass can be cut to a desired finished size and Heat Strengthened to provide a glass product with greater resistance to thermal, mechanical or impact loads. Heat Strengthened glass is not a safety glazing product and must not be used in areas where safety glazing products are required by law or by building code, or where human impact is a concern. Heat strengthened glass is commonly used:       - when thermal stresses will exceed the strength of regular annealed glass (i.e.

Thickness of the glass: The heat transfer coefficient of insulating glass is directly related to the product of the thermal resistance of the glass (the thermal resistance of the glass is 1mK/W) and the thickness of the glass. When increasing the thickness of the glass, it will inevitably increase the blocking ability of the piece of glass to heat transfer, thereby reducing the heat transfer coefficient of the entire insulating glass system.

1. Doors and windows: Tempered glass doors and windows are more secure. After all, they cannot be easily damaged. As doors and windows, their safety performance is much higher than that of ordinary glass doors and windows.2. Installation of shower room.3. Glass partition: When pretending, glass partition is also very popular. Tempered glass partition is much more stable than ordinary glass in performance.4. Ceiling design: The design of tempered glass as a ceiling is not only highly practical, but also looks more beautiful, which is also the preferred material for many people.5.