shower door-manufacture,factory,supplier from China

1. Doors and windows: Tempered glass doors and windows are more secure. After all, they cannot be easily damaged. As doors and windows, their safety performance is much higher than that of ordinary glass doors and windows.2. Installation of shower room.3. Glass partition: When pretending, glass partition is also very popular. Tempered glass partition is much more stable than ordinary glass in performance.4. Ceiling design: The design of tempered glass as a ceiling is not only highly practical, but also looks more beautiful, which is also the preferred material for many people.5.

2023.8.9-2023.8.13 Warm Sound Glass was invited to Vietnam to participate in the exhibition as well as to visit the airport project and customer's factory in Vietnam.Vietnam airport project ordered a total of about 7298m² of glass, configured with 8T ultra-white colored glaze + 1.52PVB + 8T ultra-white tri-silver low-e + 20A + 6mm ultra-white semi-tempered + 1.52PVB + 6mm ultra-white high-transparency  frosted semi-tempered glass

Even if the glass is broken, the fragments will be stuck to the film, and the broken glass surface will remain clean and smooth. This effectively prevented the occurrence of debris stabbing and penetrating accidents, and ensured personal safety. In Europe and the United States, laminated glass is used for most building glass, which is not only to avoid injury accidents, but also because laminated glass has excellent anti-seismic intrusion capability.

                                                 Spontaneous Glass Breakage ReportSpontaneous glass breakageSpontaneous glass breakage is a phenomenon by which toughened glass (or tempered) may spontaneously break without any apparent reason.

Insulating glass (IG) is separated by two or more glass panes through a vacuum or gas filled space to reduce part of the enclosure through which heat transfer passes. Insulating glass for windows A is commonly referred to as double glazing or double pane windows, triple glazing or triple pane windows, or quadruple or quadruple pane windows, depending on how many panes are used for their construction.The insulating glass unit (IGU) is usually made of glass with a thickness of 3 to 10 mm. Thicker glass is used for special applications.

Thickness of the glass: The heat transfer coefficient of insulating glass is directly related to the product of the thermal resistance of the glass (the thermal resistance of the glass is 1mK/W) and the thickness of the glass. When increasing the thickness of the glass, it will inevitably increase the blocking ability of the piece of glass to heat transfer, thereby reducing the heat transfer coefficient of the entire insulating glass system.

Heat Strengthened Glass Product      Annealed float glass can be cut to a desired finished size and Heat Strengthened to provide a glass product with greater resistance to thermal, mechanical or impact loads. Heat Strengthened glass is not a safety glazing product and must not be used in areas where safety glazing products are required by law or by building code, or where human impact is a concern. Heat strengthened glass is commonly used:       - when thermal stresses will exceed the strength of regular annealed glass (i.e.

EVA safe glassAlso known as: laminated safety glass evasafe, laminated E.V.A. (ethylene cinyl acetat), laminated evasafe, laminated stadip protect evasafe, laminated stratobel eva creation.Laminated glass with EVA foilRecently, the laminated glass with EVA film used. EVA stands for Etyleen Vinyl Acetate. This film is less sensitive to moisture and is therefore more suitable for outdoor applications of laminated glass.Depending on the required protection, a package can be composed which consists of several thicknesses glass and foil.

Laminated glass, also known as laminated glass and vacuum glass, is a composite glass product made of two or more pieces of glass with one or more layers of organic polymer interlayer sandwiched between them, and after special high-temperature pre-pressing (or vacuuming) and high-temperature and high-pressure process, the glass and interlayer are permanently bonded as one. Laminated glass commonly used interlayer PVB, SGP, EVA, PU, etc., colored interlayer laminated glass, SGX class printed interlayer laminated glass, XIR class LOW-E interlayer laminated glass, etc.

1, look at the glass markLook at the glass corners to see whether there is a tempered 3C mark, playing 3C mark (the kind that can not be scraped off) is basically tempered glass. Tempered glass processing procedures are first cut into the required size of ordinary float glass, then grinding, cleaning, with ink to play the national mandatory certification ccc mark, into the tempering furnace firing products after the glass is not cut or in the processing. And the ink is generally not scraped off after passing the high temperature.